Jeep Wrangler JK Axles
Filters
Currently Shopping by
- Category
-
- Axle Housing & Components
- Axle Shafts, Bearings & Seals
- Locking Hubs
- Trusses & Gussets
- U-Joints
- Axle Hubs & Components
- CV Axles & Components
- Differential Breather
- Fluids & Oils
- King Pin & Components
- Knuckles, Spindles & Components
- Limit Straps
- Sensors
- Skid Plates
- Wheel Studs
- Axle Disconnect Components
- Axle Mounting
- Complete Axles
There are no products matching the selection.
Please Verify Your Vehicle.
If you’re looking for optimal performance from your car, there are a lot of things you can check. Properly inflated tires and quality fuel are two big factors for getting the most out of your vehicle, but airflow is central to your engine’s performance. Poor airflow will change your fuel economy, cause rough idling, or lead to stalling. Purchasing a new air intake system isn’t always necessary. You could benefit from installing a new K&N air filter.
What to Know About Air Intake Systems
The air intake system is what supplies your engine with continuous airflow to provide power and support better gas mileage. The entire system is made up of several components working together to bring air in from outside the vehicle, mix it with gas and send it through the engine cylinders to create physical energy. The air filter is the first main part of the system. Its job is to keep dirt or other particles out of the air coming into the engine for a clean burn.
The air filter prevents contaminants from getting into the intake systems and clogging up the different parts. It also allows pure oxygen to combine with the gas for a more efficient combustion reaction. This results in better power and engine performance.
Why You Should Consider K&N Filters
When it comes to airflow, more air to your engine equals more power. A K&N filter is much larger than a standard OEM air filter, and this oversized replacement will bring more air into the engine. You will notice an increase in acceleration and added horsepower by upgrading to a K&N filter. K&N uses shorter, fatter tubing to give the air a shorter route to the engine and uses a cotton conical filter specially fitted into a sealed box.
How To Install
Turn off the ignition before you replace your filter. Unlatch the housing for the air filter and remove the old filter. You may have to remove the coupling hose to get into the air cleaner box. Install the K&N air filter to the filter adapter and hold it secure using a hose clamp. Replace the housing and coupling hose.
A clean air filter will have immediate results on your engine’s performance. Shop for K&N filters and parts at Morris 4x4 to give your vehicle a boost.
Jeep Wrangler JK Axles -K&N Filters
Head out on your next off-road adventure knowing your axles can handle the challenges you want to take on. The axles on your Jeep are meant to support the weight of your vehicle and rotate the wheels. Factory axles that come with your Jeep can handle some rugged terrain, but when you're ready for harder trails, they may not make it to the end. When you want to lift your Jeep, you also want to replace the axles with ones that are built to withstand the extra weight as you drive.
Best Axles For Jeep Wrangler JK
Stronger axles on your Jeep keep you rolling along the trail without broken parts. Some of the top aftermarket brands include Crown, Mopar, Alloy USA, Omix and Dana Spicer. Protect your housing from bending in the front of your vehicle when you upgrade the axles to handle the extra weight, especially if you add special equipment to the front. Without changing the axles on the back, the axle rods can bend when traversing a difficult course.
What To Look For When Replacing Jeep Axles
Before you replace the axles, you need to know what kind you have. A trusted mechanic can help you figure this out. You also need to know how much weight the new axle can handle. Chromoly axles made for the rear are made from high-quality materials that can make it through a harder trail without bending or breaking. They are also built to protect your vehicle when you increase the tire size or drive at higher horsepower.
Caring For Your Jeep Wrangler JK Axles
One of the most important things you can do to protect the axles on your Jeep from damage is to add a differential cover. It protects the lowest parts of the axle from damage as you cross over logs, rocks or other obstacles. You also need to make sure you aren't overloading the Jeep with accessories. Know the weight limits of the axles and stick to them to prevent bending and breaking. Enjoy the trail more when you have the proper gear attached to your Jeep.
