Jeep Wrangler JL Unlimited Axles
Filters
Currently Shopping by
- Category
-
- Axle Housing & Components
- Axle Shafts, Bearings & Seals
- Locking Hubs
- Trusses & Gussets
- U-Joints
- Axle Hubs & Components
- CV Axles & Components
- Differential Breather
- Fluids & Oils
- King Pin & Components
- Knuckles, Spindles & Components
- Limit Straps
- Sensors
- Skid Plates
- Wheel Studs
- Axle Disconnect Components
- Axle Mounting
- Complete Axles
There are no products matching the selection.
Please Verify Your Vehicle.
If you’re looking for optimal performance from your car, there are a lot of things you can check. Properly inflated tires and quality fuel are two big factors for getting the most out of your vehicle, but airflow is central to your engine’s performance. Poor airflow will change your fuel economy, cause rough idling, or lead to stalling. Purchasing a new air intake system isn’t always necessary. You could benefit from installing a new K&N air filter.
What to Know About Air Intake Systems
The air intake system is what supplies your engine with continuous airflow to provide power and support better gas mileage. The entire system is made up of several components working together to bring air in from outside the vehicle, mix it with gas and send it through the engine cylinders to create physical energy. The air filter is the first main part of the system. Its job is to keep dirt or other particles out of the air coming into the engine for a clean burn.
The air filter prevents contaminants from getting into the intake systems and clogging up the different parts. It also allows pure oxygen to combine with the gas for a more efficient combustion reaction. This results in better power and engine performance.
Why You Should Consider K&N Filters
When it comes to airflow, more air to your engine equals more power. A K&N filter is much larger than a standard OEM air filter, and this oversized replacement will bring more air into the engine. You will notice an increase in acceleration and added horsepower by upgrading to a K&N filter. K&N uses shorter, fatter tubing to give the air a shorter route to the engine and uses a cotton conical filter specially fitted into a sealed box.
How To Install
Turn off the ignition before you replace your filter. Unlatch the housing for the air filter and remove the old filter. You may have to remove the coupling hose to get into the air cleaner box. Install the K&N air filter to the filter adapter and hold it secure using a hose clamp. Replace the housing and coupling hose.
A clean air filter will have immediate results on your engine’s performance. Shop for K&N filters and parts at Morris 4x4 to give your vehicle a boost.
Jeep Wrangler JL Unlimited Axles -K&N Filters
Axles are the parts that keep your Jeep moving along as they support the weight of your vehicle and rotate the wheels. Factory axles have the ability to go off-roading in easy conditions, but if you want to tackle bigger challenges on the trail, it's necessary to upgrade them. Bigger, stronger axles have the ability to carry heavier weight and drive at a higher horsepower without bending or breaking. If you know you want to lift your Jeep or go on highly technical trails, it's time to replace the axles that came with your ride off the lot.
Best Axles For Jeep Wrangler JL Unlimited
Axles come in a variety of shapes and sizes, which means you need to know what type of driving you are hoping to do and how much weight you want to add to your Jeep. Some of the top brands include Crown, RCV Performance, Artec Industries, Dana Spicer and Mopar. The best ones are the ones that match your goals.
What To Look For When Replacing Jeep Axles
If your axles are already damaged, you need to decide if you want a similar type or something more heavy-duty. It depends on how you're using your rock crawler. The higher it is lifted and the harder the trail, the better the axles need to be. Chromoly axles are one of the most sturdy types available on the market if you want to take on the toughest challenges.
Caring For Your Jeep Wrangler JL Unlimited Axles
Protecting your axles from damage can start with a differential cover. This prevents the lower parts from being damaged by logs or rocks as you're driving. You also need to be aware of the weight limits. Each axle can handle a maximum amount of weight safely, which means you need to be careful about the accessories you want to add. Bent or broken axles need to be replaced immediately to prevent a dangerous situation on the road or trail that could ruin your entire day. Get excited about your next adventure when you have the gear you need.
