- Pressure Switch w/Relay is not a sealed unit and should be installed in an area protected from the elements to prevent damage and/or failure.
- Use thread sealant for proper installation. Thread tape is not recommended.
- Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.
- Wiring harness NOT included
Product Info
Important Notes
Description
VIAIR's Ultra Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 480C compressor,2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size.
Product Details
- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 100% @ 100 PSI
- Max. Working Pressure: 200 PSI
- Max. Amp Draw: 23-Amps
- Ingress Protection Rating: IP67
Parts Included
- 2.5 Gallon 200 PSI VIAIR Air Tank
- 480C Chrome VIAIR Air Compressor
- w/Thermal Overload Protector
- Tire Inflation Gun with 200 PSI Gauge
- Dash Panel Gauge with ON/OFF Switch
- 30ft. Coil Hose with Quick Connects
- Pressure Switch (165 PSI on, 200 PSI off)
- Reducer: 1/8" (F) to 1/4" (M)
- Reducer: 3/8" (F) to 1/4" (M)
- 1/4" Quick Connect Stud (F)
- 1/4" Quick Connect Coupler (F)
- 1/4" 250 PSI Safety Valve
- 1/4" Drain Cock
- (3) 1/4" Compression Fittings
- 20ft. 12-Gauge Wire with Inline Fuse Holder
- 4" Strip of Continuous Grommet Material
- Accessory Airline
- Electrical Connections
Additional Info
SKU | BKTN-20001 |
---|---|
Manufacturer Part Number | 20001 |
Variant ID | 3270699 |
Brand | Viair |
Part Type | Air Compressor |
SKU Aliases | 20001 |